Mobile Double Welding Smoke Purifier

Mobile Double Welding Smoke Purifier

The application and characteristics of

1. Mainly used in hair salons, beauty salons, nail salons, manual soldering, soldering pot.

2. The cleaning rate of 300nmpollution is 99%.

3. Multi-layer filtration, rapid purification

4.Noise reduction design, quiet operation.

5. Metal fuselage structure, strong and durable.

6, high quality alloy fan, large suction.

7, dc brushless motor stable performance, long service life.

8. With digital display and remote control.

9. With alarm system, remind you to replace the filter in time.

Performance of welding smoke purifier:

1\ Welding smoke purifier adopts cylinder type filtration, filtering efficiency is high (up to 99.9%), filtering area is large,

The replacement cycle of the filter cylinder is long (8 hours per day,2-5 years need to be replaced), and the replacement cost is low. Pulse back blowing type wall - mounted dust purifier has a good back blowing cleaning system. The cleaning process of the filter can be completed within two minutes, and then open the door of the equipment and clean up the ash box, which can be reused.

2 The welding fume purifier has small volume, less space occupation, energy-saving motor and energy saving

3. The Alpha arm (universal flexible suction arm) is used to pull and retract conveniently and freely. It can rotate 360 degrees and hover freely. It can directly absorb smoke and dust from the source. The normal service life of the universal flexible suction arm can reach more than 5 years

4\ Welding smoke purifier pulse back blowing type wall-mounted dust purifier provides economical and energy-saving dust purification solutions. It is more economical and practical than the pipe smoke treatment system, and the air volume of each station can reach 1200-1500 cubic meters/hour.

5\ Welding smoke purifier Install the pulse backblowing wall-mounted smoke purifier directly on the wall and connect the power supply, install the alpha arm (universal flexible suction arm) can be used.

6\ Welding smoke purifier construction is strong. 1.5m \2 m and 3m \4 \5 m alpha arms (universal coupling suction arms) can be installed directly with equipment

Welding dust is a very complex material, more than 20 kinds of elements have been found in the dust, among which the content is more Fe\Ca\Na, followed by Si\Al\Mn\Ti\Cu. The main harmful substances in welding dust are Fe2O3, SiO2, MnO, HF, etc., among which Fe2O3 is the most abundant, accounting for 35.56% of the total dust, followed by SiO2, its content accounts for 10~ 20%,MnO accounts for about 5~ 20%.

During metal welding, laser cutting and grinding operations, a large amount of smoke and dust suspended in the workshop and inhaled into the lungs of the human body will seriously affect health, leading to chronic manganese poisoning, welder pneumoconiosis and other serious diseases. Therefore, these harmful smoke and dust must be purified before entering the breathing area of the welder

Packing & Shipping

Shipping & Payment